How it works
Each run uses ceiling(run length/stock length). Use an effective stock length after trim/kerf allowance. This is a conservative count, not a cut optimizer; visible joins and mitres need their own layout.
Worked example
Trim runs of 10, 12, 7 ft cut from 8 ft stock, with no offcuts reused between runs, take 5 stock lengths for 29 ft of installed trim, and 2 of the runs need a join.
How the stock lengths needed without offcut reuse changes with usable stock length
Other inputs keep their starting values: Separate cut lengths: 10, 12, 7. Examples only, not recommendations.
| Usable stock length | Stock lengths needed without offcut reuse |
|---|---|
| 4 | 8 |
| 8 | 5 |
| 16 | 3 |
Cite this page
ToolOctopus. “Trim molding calculator.” Updated . https://tooloctopus.com/trim-moulding-calculator.
Add an access date if your instructions require one.
Citation formatting uses citeproc-js by Frank Bennett and Citation Style Language styles. License and source code.